Xerox 600 - Manual (Page 154)

2 Place the film guide (with film and shutters in place) on the scanner bed.
Be careful not to obstruct the light correction zone (the gap between the top
of the film guide and the transparent media alignment guide).
Note: To scan positive film that is too large for any of the film guides, place
the film on the document glass, leaving space for the light correction zone. To
scan negative film, create a mask from opaque material to prevent light leaks.
Transparent media
alignment guide
Light correction zone
Top of film guide
Slide the film guide
under the left-hand
edge of the scan bed.
Line up the arrow on
the film guide with the
arrow on the scanner.
146 Chapter 10