ZyXEL Communications Prestige 310 - Manual (Page 65)

Prestige 310 Broadband Sharing Gateway
Remote Node Setup 5-5
Figure 5-3 Menu 11.1 Remote Node Profile for PPPoE Encapsulation
The next table describes the fields NOT already described in Table 5-1 already.
Table 5-3 Fields in Menu 11.1 (PPPoE Encapsulation Specific Only)
Field Description Examples
Telco Option:
Allocated Budget The field sets a ceiling for outgoing call time for this remote
node. The default for this field is 0 meaning no budget
control. See section 11.2.1 for more information. 10
Period(hr) This field is the time period that the budget should be reset.
For example, if we are allowed to call this remote node for
a maximum of 10 minutes every hour, then the Allocated
Budget is (10 minutes) and the Period(hr) is 1 (hour). 1
Idle Timeout This value specifies the idle time (i.e., the length of time
there is no traffic from the Prestige to the remote node) in
seconds that can elapse before the Prestige automatically
disconnects the dial-up connection. This option only
applies when the Prestige initiates the call. 100
seconds
(default)
Schedules You can apply up to four schedule sets here. For more
details please refer to the chapter Call Schedule Setup.
Nailed-Up
Connection This field specifies if you want to make the connection to
this remote node a nailed-up connection. For more details
please refer to the section on Nailed-Up Connection.
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe Route= IP
Active= Yes
Encapsulation= PPPoE Edit IP= No
Service Type= Standard Telco Option:
Service Name= Allocated Budget(min)= 0
Outgoing= Period(hr)= 0
My Login= Schedules
My Password= ******** Nailed-up Connections=
Authen= CHAP/PAP
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.