ZyXEL Communications Prestige 310 - Manual (Page 40)

Prestige 310 Broadband Sharing Gateway
Hardware Installation & Initial Setup 2-10
Figure 2-8 Configure Dynamic DNS
Follow the instructions in the next table to configure Dynamic DNS parameters.
Table 2-6 Configure Dynamic DNS Menu Fields
Field Description Example
Service
Provider Enter the name of your Dynamic DNS client. www.ddns.org
Active Press [SPACE BAR] to toggle between Yes or No. Yes
Host Enter the domain name assigned to your Prestige by your
Dynamic DNS provider. me.ddns.org
EMAIL Enter your e-mail address. mail@mailserver
User Enter your user name.
Password Enter the password assigned to you.
Enable
Wildcard Your Prestige supports DYNDNS Wildcard. Press [SPACE
BAR] to toggle between Yes or No This field is N/A when you
choose DDNS client as your service provider. Yes
The IP address will be updated when you reconfigure Menu 1 or perform DHCP client renewal.
Please note that:
♦ The Prestige supports basic DDNS, i.e., insecure login and password.
♦ If you have a private WAN IP address, then you can not use this service.
2.8 WAN Setup
This section describes how to configure the WAN using Menu 2 – WAN (10Mbps Ethernet) Setup. From
the Main Menu, enter 2 to open Menu 2.
Menu 1.1 - Configure Dynamic DNS
Service Provider = WWW.DynDNS.ORG
Active= Yes
Host= me.ddns.org
EMAIL= mail@mailserver
User= username
Password= ******
Enable Wildcard= No
Press ENTER to confirm or ESC to cancel: