ZyXEL Communications Prestige 310 - Manual (Page 37)

Prestige 310 Broadband Sharing Gateway
Hardware Installation & Initial Setup 2-7
# Menu Title Description
21 Filter Set Configuration Use this menu to setup filters to provide security.
22 SNMP Configuration Use this menu to setup SNMP related parameters
23 System Password Use this menu to setup a new password.
24 System Maintenance This menu provides system status, diagnostics, firmware upload, etc.
26 Schedule Setup Use this menu to schedule outgoing calls.
99 Exit To exit from SMT and return to the blank screen.
2.6 Changing the System Password
The first thing your should do before anything else is to change the default system password by following the
steps below.
Step 1.
Enter 23 in the Main Menu to open Menu 23 - System Password as shown below.
Figure 2-6 Menu 23 - System Security
Step 2. Enter your existing password and press [Enter].
Step 3. Enter your new system password and press [Enter].
Step 4. Re-type your new system password for confirmation and press [Enter].
Note that as you type a password, the screen displays a (X) for each character you type.
2.6.1 Resetting the Prestige
If you have forgotten your password or for some reason cannot access the SMT menu you will need to
reinstall the configuration file. Uploading the configuration file replaces the current configuration file with
the default configuration file, you will lose all configurations that you had before and the speed of the
Menu 23 - System Password
Old Password= ?
New Password= ?
Retype to confirm= ?
Enter here to CONFIRM or ESC to CANCEL: