ZyXEL Communications Prestige 310 - Manual (Page 127)

Prestige 310 Broadband Sharing Gateway
System Maintenance & Information 11-1
Chapter 11:
System Maintenance & Information
This chapter leads you through SMT menus 24.8 to 24.11.
11.1 Command Interpreter Mode
This option allows you to enter command interpreter mode, a “DOS prompt” type command interface, which
allows more advanced system diagnosis and troubleshooting (beyond the scope of this guide). See our
supporting CD or the zyxel web site at www.zyxel.com for more detailed information on CI commands.
Enter 8 from Menu 24 - System Maintenance. A list of valid commands can be found by typing [help] or
[?] at the command prompt. Type “exit” to return to the SMT main menu when finished.
Figure 11-1 Command Mode
11.2 Call Control Support
The Prestige provides two call control functions: budget management and call history. Please note that this
menu is only applicable when Encapsulation is set to PPPoE in Menu 4 or Menu 11.1.
The budget management function allows you to set a limit on the total outgoing call time of the Prestige
within certain times. When the total outgoing call time exceeds the limit, the current call will be dropped and
any future outgoing calls will be blocked.
Call history chronicles preceding incoming and outgoing calls.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Firmware Update
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
Enter Menu Selection Number: