ZyXEL Communications P-870MH-C1 - Manual (Page 52)

Chapter 7 sys Commands
P-870MH-C1 User’s Guide
52
7.2 sys date
Syntax:
sys date [ ]
Parameter(s):
Use this command to look at or set the current date and time in the P-870MH-C1. If you enter
the optional parameters, the command changes the value of the setting to the specified
parameter. If you do not enter any of the parameters, the command displays the current value.
See
Section 6.1 on page 45 for examples of this command.
7.3 sys domain
Syntax:
sys domain
Use this command to display the domain name of the P-870MH-C1.
7.4 sys hostname
Syntax:
sys hostname []
Parameter(s):
Use this command to look at or set the system name of the P-870MH-C1. The system name is
used in the prompt that you see when you log in to the P-870MH-C1. If the name is blank, the
prompt is ras. See
Section 6.1 on page 45 for examples of this command.
7.5 sys romreset
Syntax:
sys romreset
ticks This field displays the number of CPU cycles that the CPU was free in
each interval.
util This field displays the CPU utilization in the specified interval. This is
equal to the number of CPU cycles that the CPU was busy in each
interval, divided by the total number of CPU cycles in each interval.
Table 10 sys cpu display Output Values (continued)
LABEL DESCRIPTION
= Specifies the current year, in four digits .
= Specifies the current month <1..12>.
= Specifies the current day <1..31>. (Days 29, 30, and 31 are not
allowed in some months.)
= Specifies the system name of the P-870MH-C1. The name
consists of 1-9 printable characters. Spaces and tabs are not
allowed.