ZyXEL Communications P-870MH-C1 - Manual (Page 37)

Chapter 4 Introducing the FTP Server
P-870MH-C1 User’s Guide
37
3 Transfer the configuration file from the computer to the P-870MH-C1, and rename it to
rom-0.
Wait for the P-870MH-C1 to reboot.
1
Do not interrupt the P-870MH-C1 while it is uploading the configuration file or
rebooting after the upload. Interrupting the P-870MH-C1 might permanently
damage it.
When the P-870MH-C1 is ready again, you can log in to confirm that the P-870MH-C1 is
using the restored configuration file.
4.5 Logging out of the FTP Server
Type quit to log out of the FTP server.
Figure 21 Example: Upload Firmware Using FTP
ftp> bin
200 Type I OK
ftp> put zyxel.rom rom-0
200 Port command okay
150 Opening data connection for STOR rom-0
226 File received OK
221 Goodbye for writing flash
ftp: 16384 bytes sent in 0.00Seconds 16384000.00Kbytes/sec.