2 using the command interface – ZyXEL Communications P-870MH-C1 User Manual
Page 42
Chapter 5 Introducing the Command Interface
P-870MH-C1 User’s Guide
42
2 When prompted, enter the password (default: 1234).
The P-870MH-C1 displays the prompt.
You can change the prompt by setting the host name. (See
.)
5.2 Using the Command Interface
The P-870MH-C1 uses a one-level command structure. You must type the full command every
time. For example, enter sys version; do not enter sys, press [ENTER], and then enter
version.
Commands can be abbreviated to the smallest unique string that differentiates the command
from other available commands. For example, the sys version command in the previous
example can be abbreviated to s ve.
Type help or ? to display a list of commands that are available, or type a command followed
by help or ? to display the subcommands that are available for that command.
Figure 23 Password
Password : ****
Figure 24 Prompt
Copyright (c) 1994 - 2006 ZyXEL Communications Corp.
ras>
Figure 25 Command Interface: One-level Structure
ras> sys version
ZyNOS version: V3.50(RT.1) | 10/01/2006
romRasSize: 1079042
system up time: 0:05:47 (8790 ticks)
bootbase version: V1.04 | 06/23/2006
ZyNOS CODE: RAS Aug 18 2006 16:54:32
Product Model: P-870MH-C1
ras>
Figure 26 Command Interface: Abbreviated Commands
ras> s ve
ZyNOS version: V3.50(RT.1) | 10/01/2006
romRasSize: 1079042
system up time: 0:05:47 (8790 ticks)
bootbase version: V1.04 | 06/23/2006
ZyNOS CODE: RAS Aug 18 2006 16:54:32
Product Model: P-870MH-C1
ras>
Figure 27 Command Interface: Help or ?
ras> ?
Valid commands are:
sys exit ip vdsl
vlanQoS
ras> vdsl help
status pktcntclr
ras>