ZyXEL Communications P-870MH-C1 - Manual (Page 25)

Chapter 2 Introducing the SMT
P-870MH-C1 User’s Guide
25
After you enter the password, the SMT displays the main menu, as shown next.
2.2.1 System Management Terminal Interface Summary
2.3 Changing the System Password
Change the P-870MH-C1 default password by following the steps below.
1 Enter 23 in the main menu to display Menu 23 - System Security.
2 Enter 1 to display Menu 23.1 - System Security - Change Password as shown next.
3 Type your existing system password in the Old Password field, for example “
1234 ",
and press [ENTER].
Save your
configuration
[ENTER] Save your configuration by pressing [ENTER] at the message
"Press ENTER to confirm or ESC to cancel". Saving the data on
the screen will take you, in most cases to the previous menu.
Exit the SMT Type 99, then press [ENTER].Type 99 at the main menu prompt
and press [ENTER] to exit the SMT interface.
Figure 4 SMT Main Menu
Copyright (c) 1994 - 2006 ZyXEL Communications Corp.
P-870MH-C1 Main Menu
Getting Started Advanced Management
1. General Setup 23. System Password
3. LAN Setup 24. System Maintenance
Advanced Applications
99. Exit
Enter Menu Selection Number:
Table 3 Navigating the SMT Interface (continued)
OPERATION KEY STROKE DESCRIPTION
Table 4 Main Menu Summary
# MENU TITLE DESCRIPTION
1 General Setup Use this menu to set up your general information.
3 LAN Setup Use this menu to set up your wireless LAN and LAN connection.
23 System Security Use this menu to set up wireless security and change your
password.
24 System Maintenance This menu provides system status, diagnostics, software upload
information.
99 Exit Enter this number to exit from SMT.