ZyXEL Communications ZyXEL ZyAIR B-1000 - Manual (Page 85)

ZyAIR Access Point Series User’s Guide
Multiple ESS and VLAN 7-7
Table 7-2 Wireless : Edit ESS
LABEL DESCRIPTION
Unicast WEP key
Key 1 or Key 2 Key 1 or key 2 is used to encrypt unicast transmissions.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal
characters ("0-9", "A-F").
You must configure both keys, but only one key can be activated at any one
time. The default key is key 1.
Broadcast/Multicast WEP key
Key 3 or Key 4 Key 3 or key 4 is used to encrypt multicast/broadcast transmissions.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal
characters ("0-9", "A-F").
You must configure both keys, but only one key can be activated at any one
time. The default key is key 3.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to begin configuring this screen afresh.
7.3.2 MAC Filter Summary
If you select Multiple ESS in the Operating Mode field in the Wireless screen, the MAC Filter Summary
screen displays as shown when you click the MAC Filter tab.