ZyXEL Communications ZyXEL ZyAIR B-1000 - Manual (Page 152)

ZyAIR Access Point Series User’s Guide
18-2 System Information and Diagnosis
Figure 18-2 Menu 24.1 System Maintenance : Status
The following table describes the fields present in this menu.
Table 18-1 Menu 24.1 System Maintenance : Status
FIELD DESCRIPTION
Port This is the port type. Port types are: Ethernet and Wireless
Status This shows the status of the remote node.
TxPkts This is the number of transmitted packets to this remote node.
RxPkts This is the number of received packets from this remote node.
Cols This is the number of collisions on this connection.
Tx B/s This shows the transmission rate in bytes per second.
Rx B/s This shows the receiving rate in bytes per second.
Up Time This is the time this channel has been connected to the current remote node.
Ethernet Address This shows the MAC address of the port.
IP Address This shows the IP address of the network device connected to the port.
IP Mask This shows the subnet mask of the network device connected to the port.
DHCP This shows the DHCP setting (None or Client) for the port.
Menu 24.1 - System Maintenance - Status 00:57:47
Sat. Jan. 01, 2000
Port Status TxPkts RxPkts Cols Tx B/s Rx B/s Up Time
ETH 100M/Full 1092 2199 0 286 128 0:57:45
WLAN 11M 915 0 0 0 0 0:57:45
Port Ethernet Address IP Address IP Mask DHCP
ETH 00:A0:C5:01:23:45 192.168.1.2 255.255.255.0 None
WLAN 00:A0:C5:01:23:45
System up Time: 0:57:50
Name: B-3000
ZyNOS F/W Version: V3.50(HC.0)b3 | 06/23/2003
Press Command:
COMMANDS: 9-Reset Counters ESC-Exit