ZyXEL Communications ZyXEL ZyAIR B-1000 - Manual (Page 168)

ZyAIR Access Point Series User’s Guide
20-2 System Maintenance and Information
20.2 Time and Date Setting
The ZyAIR keeps track of the time and date. There is also a software mechanism to set the time manually
or get the current time and date from an external server when you turn on your ZyAIR. Menu 24.10 allows
you to update the time and date settings of your ZyAIR. The real time is then displayed in the ZyAIR error
logs and firewall logs.
Step 1.
Select menu 24 in the main menu to open Menu 24 – System Maintenance.
Step 2. Then enter 10 to go to Menu 24.10 – System Maintenance – Time and Date Setting to update
the time and date settings of your ZyAIR as shown in the following screen.
Figure 20-3 Menu 24.10 System Maintenance : Time and Date Setting
The following table describes the fields in this menu.
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= NTP (RFC-1305)
Time Server Address= 128.105.39.21
Current Time: 05 : 47 : 19
New Time (hh:mm:ss): 05 : 47 : 17
Current Date: 2000 - 01 - 01
New Date (yyyy-mm-dd): 2000 - 01 - 01
Time Zone= GMT
Daylight Saving= No
Start Date (mm-dd): 01 - 01
End Date (mm-dd): 01 - 01
Press ENTER to Confirm or ESC to Cancel: