ZyXEL Communications ZyXEL ZyAIR B-1000 - Manual (Page 148)

ZyAIR Access Point Series User’s Guide
17-4 System Security
Figure 17-5 Menu 23.4 System Security : IEEE802.1x
The following table describes the fields in this menu.
Table 17-2 Menu 23.4 System Security : IEEE802.1x
FIELD DESCRIPTION
Wireless Port
Control Press [SPACE BAR] and select a security mode for the wireless LAN access.
Select No Authentication Required to allow any wireless stations access to your
wired network without entering usernames and passwords. This is the default setting.
Selecting Authentication Required means wireless stations have to enter usernames
and passwords before access to the wired network is allowed.
Select No Access Allowed to block all wireless stations access to the wired network.
ReAuthentica-
tion Timer
(in seconds) Specify how often a wireless station has to re-enter username and password to stay
connected to the wired network.
This field is activated only when you select Authentication Required in the Wireless
Port Control field. Enter a time interval between 10 and 9999 (in seconds). The default
time interval is 1800 seconds (or 30 minutes).
Idle Timeout The ZyAIR automatically disconnects a wireless station from the wired network after a
period of inactivity. The wireless station needs to enter the username and password
again before access to the wired network is allowed.
This field is activated only when you select Authentication Required in the Wireless
Port Control field. The default time interval is 3600 seconds (or 1 hour).
Menu 23.4 - System Security - IEEE802.1X
Wireless Port Control= Authentication Required
ReAuthentication Timer (in second)= 1800
Idle Timeout (in second)= 3600
Authentication Databases= RADIUS Only
Dynamic WEP Key Exchange= Disable
Press ENTER to Confirm or ESC to Cancel: