ZyXEL Communications ZyXEL ZyAIR B-1000 - Manual (Page 221)

ZyAIR Access Point Series User’s Guide
Log Description N-1
Appendix N
Log Descriptions
Chart N-1 System Error Logs
LOG MESSAGE DESCRIPTION
%s exceeds the max.
number of session per
host!
This attempt to create a NAT session exceeds the maximum number of
NAT session table entries allowed to be created per host.
Chart N-2 System Maintenance Logs
LOG MESSAGE DESCRIPTION
Time calibration is
successful
The router has adjusted its time based on information from the time
server.
Time calibration
failed
The router failed to get information from the time server.
DHCP client gets %s A DHCP client got a new IP address from the DHCP server.
DHCP client IP
expired
A DHCP client's IP address has expired.
DHCP server assigns
%s
The DHCP server assigned an IP address to a client.
SMT Login
Successfully
Someone has logged on to the router's SMT interface.
SMT Login Fail Someone has failed to log on to the router's SMT interface.
WEB Login
Successfully
Someone has logged on to the router's web configurator interface.
WEB Login Fail Someone has failed to log on to the router's web configurator interface.
TELNET Login
Successfully
Someone has logged on to the router via telnet.
TELNET Login Fail Someone has failed to log on to the router via telnet.