ZyXEL Communications ZyXEL ZyAIR B-1000 - Manual (Page 83)

ZyAIR Access Point Series User’s Guide
Multiple ESS and VLAN 7-5
Table 7-1 Wireless : Multiple ESS
LABEL DESCRIPTION
Operating Mode Select Multiple ESS in this field to display the screen as shown in Figure 7-3.
Choose Channel ID Set the operating frequency/channel depending on your particular region.
To manually set the ZyAIR to use a channel, select a channel from the drop-
down list box. Click MAINTENANCE, WIRELESS and then the Channel Usage
tab to open the Channel Usage Table screen to make sure the channel is not
already used by another AP or independent peer-to-peer wireless network.
To have the ZyAIR automatically select a channel, click Scan instead.
Refer to the Wizard Setup chapter for a little more information on channels.
Scan To have the ZyAIR automatically select a channel, click Scan instead.
Extended Service Set (ESS) Summary
# This is the index number of each ESS.
ESSID This is the identification name of each ESS.
ACTIVE This field displays Yes if the ESS is active and No if it is not.
VLAN ID This is the identification number of each VLAN.
Edit Select the radio button next to the ESS index you want to configure and click
Edit to go to the EDIT ESS screen.
Delete Select the radio button next to the ESS index you want to remove and click
Delete to remove the ESS.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to begin configuring this screen afresh.
7.3.1 Edit ESS
Click Edit on the Wireless screen.