ZyXEL Communications ZyXEL ZyAIR B-1000 - Manual (Page 222)

ZyAIR Access Point Series User’s Guide
N-2 Log Descriptions
Chart N-2 System Maintenance Logs
FTP Login
Successfully
Someone has logged on to the router via FTP.
FTP Login Fail Someone has failed to log on to the router via FTP.
NAT Session Table is
Full!
The maximum number of NAT session table entries has been
exceeded and the table is full.
Chart N-3 ICMP Notes
TYPE CODE DESCRIPTION
0 Echo Reply
0 Echo reply message
3 Destination Unreachable
0 Net unreachable
1 Host unreachable
2 Protocol unreachable
3 Port unreachable
4 A packet that needed fragmentation was dropped because it was set to Don't
Fragment (DF)
5 Source route failed
4 Source Quench
0 A gateway may discard internet datagrams if it does not have the buffer space
needed to queue the datagrams for output to the next network on the route to
the destination network.
5 Redirect
0 Redirect datagrams for the Network
1 Redirect datagrams for the Host
2 Redirect datagrams for the Type of Service and Network
3 Redirect datagrams for the Type of Service and Host