ZyXEL Communications ZyXEL ZyAIR B-1000 - Manual (Page 111)

ZyAIR Access Point Series User’s Guide
Maintenance 10-11
Table 10-7 Restore Configuration
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse...
Click Browse... to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Upload Click Upload to begin the upload process.
Do not turn off the device while configuration file upload is in progress.
After you see a “configuration upload successful” screen, you must then wait one minute before logging into
the ZyAIR again.
Figure 10-12 Configuration Upload Successful
The ZyAIR automatically restarts in this time causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 10-13 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your computer to be
in the same subnet as that of the default ZyAIR IP address (192.168.1.2). See the appendix for details on how
to set up your computer’s IP address.