ZyXEL Communications ZyXEL ZyAIR B-1000 - Manual (Page 123)

ZyAIR Access Point Series User’s Guide
General Setup 12-1
Chapter 12
General Setup
The chapter shows you the information on general setup.
12.1 General Setup
Menu 1 – General Setup contains administrative and system-related information (shown next). The
System Name field is for identification purposes. It is recommended you type your computer's "Computer
name".
The Domain Name entry is what is propagated to the DHCP clients on the LAN. While you must enter the
host name (System Name) on each individual computer, the domain name can be assigned from the ZyAIR
via DHCP.
12.1.1 Procedure To Configure Menu 1
Step 1. Enter 1 in the Main Menu to open Menu 1 – General Setup as shown next.
Figure 12-1 Menu 1 General Setup
Step 2. Fill in the required fields. Refer to the following table for more information about these fields.
Menu 1 - General Setup
System Name= B-3000
Domain Name=
First System DNS Server= From DHCP
IP Address= N/A
Second System DNS Server= None
IP Address= N/A
Third System DNS Server= None
IP Address= N/A
Press ENTER to Confirm or ESC to Cancel: