ZyXEL Communications Prestige 100WH - Manual (Page 82)

Prestige 100WH Internet Access Router
6-6 Chapter 6 Dial-in Server Applications
Table 6-2. Default Dial-in Setup Fields (continued)
Field Description
Callback Budget
Management: Allocated
Budget (min) This field sets the budget callback time for all the dial-in users. The
default for this field is [0] for unlimited budget.
Callback Budget
Management: Period
(hr) This field sets the time interval to reset the above callback budget
control.
Dial-In IP Address
Supplied By: Dial-in
User If set to [Yes], it tells your Prestige to allow a remote host to specify its
own IP address.
If set to [No], the remote host must use the IP address assigned by your
Prestige from the IP pool, configured below. This is to prevent the
remote host from using an invalid IP address and potentially disrupting
the whole network.
Dial-In IP Address
Supplied By: IP Pool This field tells your Prestige to provide the remote host with an IP
address from the pool. This field is required if Dial-In IP Address
Supplied By: Dial-in User is set to [No]. You can configure this field even
if Dial-in User is set to [Yes], in which case your Prestige will accept the
IP address if the remote peer specifies one; otherwise, an IP address is
assigned from the pool.
IP Pool: IP Start Addr This field is active only if you selected [Yes] in the Dial-In IP Address
Supplied By: IP Pool field.
The IP pool contains contiguous IP addresses and this field specifies
the first one in the pool.