ZyXEL Communications Prestige 100WH - Manual (Page 101)

Prestige 100WH Internet Access Router
9-1 Chapter 9 Telnet Configuration and Capabilities
Chapter 9
Telnet Configuration and Capabilities
9.1 About Telnet Configuration
When you first configure your Prestige, it must be done via the console port since your
Prestige does not have the network parameters set yet. However, once your Prestige has been
configured, you can telnet to the Prestige remotely to perform the configuration, as shown in
Figure 9-1.
Figure 9-1. Telnet Configuration on a TCP/IP Network
Prestige with
Network IP Address
Telnet from any
station on the Network
Telnet from any
Remote Location
TCP/IP Network
E t h e r n e t L A N
Modem
ISDN TA
Modem / ISDN TA
Prestige 100WH
Modem
ISDN TA
Modem / ISDN TA
PSTN/ISDN Network