ZyXEL Communications Prestige 100WH - Manual (Page 63)

Prestige 100WH Internet Access Router
4-3 Chapter 4 Remote Node Configuration
Table 4-1. Remote Node Profile Menu Fields for Dial-up Line Applications
(continued)
Field Description
l If this parameter is set to [Both], your Prestige can both place
and receive calls to/from this remote node.
l If set to [Incoming], your Prestige will not place a call to this
remote node.
l If set to [Outgoing], your Prestige will drop an incoming call
from this remote node.
Call Direction
Several other fields in this menu depend on this parameter. For
example, in order to enable [Call Back], the Call Direction must be
[Both].
Incoming: Rem Login Enter the login name that this remote node uses to call into your
Prestige.
The login name in this field combined with the Rem Password will be
used to authenticate the incoming calls from this node.
Incoming: Rem
Password Enter the password used when this remote node calls into your
Prestige.
Incoming: Rem CLID This field is active only if [Call Direction] is either [Both] or
[Incoming]. Otherwise, an [N/A] appears in the field.
This is the Calling Line ID (the telephone number of the calling party)
of this remote node.
If you enable the CLID Authen field in Menu 13 - Default Dial In, your
Prestige will check the CLID in the incoming call against all CLID in
the database. If none of them match and the CLID Authen is
Required, the call will be rejected.