ZyXEL Communications Prestige 100WH - Manual (Page 66)

Prestige 100WH Internet Access Router
4-6 Chapter 4 Remote Node Configuration
Table 4-1. Remote Node Profile Menu Fields for Dial-up Line Applications
(continued)
Field Description
Session Option:
Idle Timeout (sec)
The Idle Timeout specifies the number of idle seconds that elapses
before the remote node is automatically disconnected. The idle
timer is reset whenever there is data traffic from the Prestige;
however, administrative packets such as RIP are not counted as
data. The default is 300 seconds (5 minutes).
The idle timeout mechanism is disabled if the value is set to 0, i.e.,
the connection will stay up indefinitely.
Once you have completed filling in Menu 11.1.1 – Remote Node Profile, press [Enter] at the
message [Press ENTER to Confirm ...] to save your configuration, or press [Esc] at any time to
cancel.