9 prestige 100wh wan port setup, 1 wan port setup – ZyXEL Communications Prestige 100WH User Manual

Page 40

Prestige 100WH Internet Access Router

2-12

Chapter 2 Hardware Installation & Initial Setup

2.9 Prestige 100WH WAN Port Setup

This section describes how to configure the WAN port and the connected WAN device on
your Prestige with Menu 2-WAN Port Setup. If advanced setup is required, go into Menu 2.1.
When you are finished, press [Enter] in Menu 2.1 to save your configuration.

2.9.1 WAN Port Setup

To configure the WAN Port on the Prestige, follow these steps:

Step 1.

Select option [2. WAN Port Setup] in the Main Menu by typing 2 at the menu
selection number prompt.

Step 2.

This will bring up Menu 2 –WAN Port Setup, as shown in Figure 2-7.

Figure 2-7.

Menu 2.1 – WAN Port Setup

Menu 2.1 – WAN Port Setup

Modem Name= ZyXEL
Active= Yes
Direction= Outgoing
Phone Number=
Port Speed=

AT Command String

Init= at&fs0=0w2s95=1

Advanced Setup= No

Press ENTER to Confirm or ESC to Cancel: