ZyXEL Communications Prestige 100WH - Manual (Page 75)

Prestige 100WH Internet Access Router
5-7 Chapter 5 Remote Node TCP/IP Configuration
To create a static route for IP, use Menu 12, Static Route Setup, as displayed in Figure 5-5.
Figure 5-5. Menu 12 - Static Route Setup
From Menu 12, select one of the four possible IP Static Routes (no. 1-4), this will open Menu
12.2 - Edit IP Static Route, as shown in Figure 5-6.
Figure 5-6. Menu 12.1 - Edit IP Static Route
Menu 12 - Static Route Setup
1. sroute
2. ________
3. ________
4. ________
Enter Selection Number:
Menu 12.1 - Edit IP Static Route
Route #: 1
Route Name= sroute
Active= Yes
Destination IP Address= 192.68.135.1
IP Subnet Mask= 255.255.255.0
Gateway IP Address= 204.247.135.1
Metric= 2
Private= No
Press ENTER to Confirm or ESC to Cancel: