ZyXEL Communications Prestige 100WH - Manual (Page 30)

Prestige 100WH Internet Access Router
2-2 Chapter 2 Hardware Installation & Initial Setup
2.2 Additional Installation Requirements
In addition to the contents of your package, there are other hardware and software
requirements you need before you can install and use your Prestige. These requirements
include:
l A computer with Ethernet 10Base-T NIC (Network Interface Card).
l A computer equipped with communications software (for example, Hyper Terminal in
Win95) configured to the following parameters:
Ø VT100 terminal emulation.
Ø 9600 Baud rate.
Ø No parity, 8 Data bits, 1 Stop bit.
After the Prestige has been successfully connected to your network, you can make future
changes to the configuration through telnet application.