ZyXEL Communications Prestige 100WH - Manual (Page 67)

Prestige 100WH Internet Access Router
4-7 Chapter 4 Remote Node Configuration
4.1.2 Editing PPP Options
To edit the remote node PPP Options, move the cursor to the [Edit PPP Options] field in
Menu 11.1 - Remote Node Profile, and use the space bar to toggle and select [Yes], then press
[Enter]. Menu 11.2 appears as shown in Figure 4-3.
Figure 4-3. Menu 11.2 - Remote Node PPP Options
Table 4-2 describes the Remote Node PPP Options Menu, and contains instructions on how to
configure the PPP options fields.
Table 4-2. Remote Node PPP Options Menu Fields
Field Description
Select the vendor-specific encapsulation for the link. There are
two options in this field.
l Standard PPP - Standard PPP options will be used.
Encapsulation
l CISCO PPP - Cisco PPP will be used.
Compression Turn on the Stac Compression. The default for this field is [Off].
Once you have completed filling in Menu 11.2 - Remote Node PPP Options, press [Enter] at the
message [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to
cancel.
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Press ENTER to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.