ZyXEL Communications U-336SA - Manual (Page 93)

Fax Operation 79
Command Value Description
n=0 Disable polling.
n=1 Enable polling.
Class 2.0 Command Responses
Response Value Function and Description
+FCI:"CSI ID
string" Report remote ID response, Called
Station ID
+FCO Fax connection established response.
+FCS:vr,br,wd,ln
,df,ec,bf,st negotiated session parameters (DCS
frame information) response. Refer to
+FIS= comnd.
+FET: Post page message response:
ppm=0 Another page next, same document.
ppm=1 Another document next.
ppm=2 No more pages of documents.
ppm=3 Another page next, same document,
procedure interrupt requested.
ppm=4 Another document next, procedure
interrupt requested.
ppm=5 No more documents or pages,
procedure interrupt requested.
+FHS: Call termination status:
hsc=
0-0F Call placement and termination. Refer
to TIA-592 for details.
hsc=
10-1F Transmit phase A and miscellaneous
errors. Refer to TIA-592 for details.
hsc=
20-3F Transmit phase B hang up codes. Refer
to TIA-592 for details.
hsc=
40-4F Transmit phase C hang up codes. Refer
to TIA-592 for details.
hsc=
50-6F Transmit phase D hang up codes. Refer
to TIA-592 for details.