ZyXEL Communications U-336SA - Manual (Page 129)

Status Registers & Result Codes 115
Command bit dec hex Function and description Ref.
0 1 1 Use CELL 4800T trells coded
4800 for V.32 4800 (available
with cellular mode only)
1 2 2 Disable aborting from terminal
during modem handshaking
2 4 4 V.26 alternative A. (see also
‘&N11’)
3 8 8 Add 12 dBm attenuation to the
leased line transmission power
4 16 10 When Data/Voice with is
pressed, modem will dial the
default number. *Dn
S29
5 32 20 Enable Selective Reject in V.42
(Default)
6 64 40 Enable password protection to
profile saving. When ‘AT&W0’
is issued, and profile 0 in the
NVRAM has this bit set, the
supervisory password will be
requested. This bit in profile 0
also protects the supervisory
password from a hardware reset. *W0
7 128 80 Enable extended numerical result
codes from 50-71 when an error
corrected connection is made.
Use with ATV0. (see result code
table) V0
S23.6
S36= bit dec hex Bit-mapped register +000
0 0 0 Deny remote request for
configuration (Default) *F0