ZyXEL Communications U-336SA - Manual (Page 105)

AT Command Set Summaries 91
Command Options Function & Description Ref.
T Ton dial S23.1
UPX Download firmware to the Flash
EPROM by using Xmodem protocol
Vn Sets display type for Result Codes S23.6
V0 Display result code in numeric form.
(See also S35.7 and the result code
table of 'ATXn')
V1 * Display result code in verbose form.
Xn n=0-7
5 * Result code options, see the Options
Table S23.3-5
Zn n=0-4 Reset modem and set power-on
profile. S15.5-7
Zn Reset modem and load user profile n
(0-3).
Z4 Reset modem and load factory
settings.
$ Basic command summary help
&$ Extended 'AT&' command summary
help
*$ Extended 'AT*' command summary
help
Description of ATI2 Output:
The Link Status Report output appears as follows:
ZyXEL MODEMS LINK STATUS REPORT
Chars Sent 0 Chars Received 0
Octets Sent 0 Octets Received 0
Blocks Sent 0 Blocks Received 0