ZyXEL Communications U-336SA - Manual (Page 28)

14 Basic Modem Operation
Using the Windows 95 Hyper Terminal
Program
In order to issue an AT command statement, you first need to run a
communication program such as the Microsoft Windows “Hyper
Terminal” program. This program provides a simple method to manually
enter AT commands so you can do such things as “customize” the
settings of your modem, or store commonly used phone numbers.
Once your modem is connected to your computer’s serial port and
telephone line, open the Windows 95 “Accessories” program group,
and open the Hyper Terminal Program.
The program will prompt you for a name and Icon to use for your new
connection. Type the name Test Connection and press .
Next, you will be prompted for country information, area code and
phone number, and the device used to make the connection. For this
test purpose, do not enter a phone number; simply choose the COM
port your modem is connected to from the “Connect Using” list. Click
“OK” when finished.
The next window sets the COM port settings. The settings used for
your modem should be as follows.
Bits per second: 57600
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: Hardware
Click “OK” when finished. After you have done this, save your new
connection by selecting “Save” from the “File” menu and click “OK.” A
new connection icon will be added to your Hyper Terminal folder.