ZyXEL Communications U-336SA User Manual
Page 87
Fax Operation 73
Command
Value Description
n=1
Enable polling.
All other +F commands are not supported, but the modem will respond
OK. In many cases this means "don't care." See PN 2388 for
command details.
Class 2 Command Responses
Response
Value Function and Description
+FCFR
Confirmation .
+FCIG:"string"
Report remote ID response CIG.
+FCON
Facsimile connection response.
+FCSI:"string"
Report remote ID response CSI.
+FDCS:vr,br,wd,l
n,df,ec,bf,st
Report session parameters response;
refer to +FDCC=.... command.
+FDIS:vr,br,wd,ln
,df,ec,bf,st
Report session negotiation parameters
response; refer to +FDCC=....
command.
+FDTC:vr,br,wd,l
n,df,ec,bf,st
Report remote capabilities response;
refer to +FDCC=.... command.
+FET:n
Post page message response; refer to the
+FET=n command.
+FHNG:n
Call termination status response.
n=00
Normal and proper end of connection.
n=10
Transmit error on phase A hang up code.
n=20
Transmit error on phase B hang up code.
n=40
Transmit error on phase C hang up code.
n=50
Transmit error on phase D hang up code.
n=70
Receive error on phase B hang up code.
n=90
Receive error on phase C hang up code.
n=100 Receive error on phase D hang up code.
+FNSC:"HEX string"
Report the non-standard facilities
command frame.