ZyXEL Communications U-336SA - Manual (Page 81)

Fax Operation 67
Several revisions of the class 2 standard exist. Implementations
conforming to different revisions may not work together. A formally
approved version is the Class 2.0 command set, also called the TIA-
592 standard.
Class 1 Command Set
Command Value Description
+FCLASS=n Service class selection
n=0 Set to Data mode
n=1 Set to Class 1 mode
n=2 Set to Class 2 mode
n=2.0 Set to Class 2.0 mode
n=6 Set to ZFAX mode
n=8 Set to Voice mode
ON OTE
: I
F
S57.4=0 (
DEFAULT
),
THE RESPONSE TO THE
+FCLASS=?
COMMAND WILL
NOT REPORT
C
LASS
1
CAPABILITY
. T
HIS IS DUE TO THE FACT THAT SOME FAX
SOFTWARE PACKAGES MAY GET CONFUSED BY THIS RESPONSE
.
Command Value Description
+FTS=n 0-255 Stop transmission and pause, in 10 ms
units.
+FRS=n 0-255 Wait for silence, in 10 ms units.
+FTM= Transmit data with carrier.
+FRM= Receive data with carrier.
+FTH= Transmit HDLC data with
carrier.
+FRH= Receive HDLC data with
carrier.
The parameter for the preceding commands take the following
values: