ZyXEL Communications U-336SA - Manual (Page 82)

68 Fax Operation
Value Modulation Speed Requirements
3 V.21 ch. 2 300 required for FTH & FRH
+FTH and +FRH support value 3 (V.21 ch. 2 / 300 bps) only.
24
V.27ter 2400 required for FTM & FRM
48 V.27ter 4800 required for FTM & FRM
72 V.29 7200 required for FTM & FRM
73 V.17 7200 required for FTM & FRM
74 V.17 w/st 7200 required for FTM & FRM
96 V.29 9600 required for FTM & FRM
97 V.17 9600 required for FTM & FRM
98 V.17 w/st 9600 required for FTM & FRM
121 V.17 12000 required for FTM & FRM
122 V.17 w/st 12000 required for FTM & FRM
145 V.17 14400 required for FTM & FRM
146 V.17 w/st 14400 required for FTM & FRM
* w/st means with V.17 short training
Class 2 Command Set
The following Class 2 commands are supported and implemented per
TIA PN2388 (8/20/90):
Command Syntax Description
+= Execute a command or set a
parameter.
+=? Read permissible settings.
+? Read current setting.
Supported Commands (per TIA PN2388 8/20/90)
Command Value Description
+FAA=n Auto-answer mode parameter:
n=0 Answer as set by +FCLASS.
n=1 DCE answers and auto-determines type.