beautypg.com

7 system setup, 1 reset to default, 2 firmware upgrade – ZyXEL Communications WPA-1000 User Manual

Page 48: 1 reset to default 4.7.2 firmware upgrade, Figure 30 system setup > reset to default

background image

Chapter 4 The Web Configurator Screens

WPA-1000 User’s Guide

48

4.7 System Setup

Use these screens to reset the WPA-1000 to its factory defaults, upload new firmware and
restart the device.

4.7.1 Reset to Default

To reset the WPA-1000 to its default settings, use the hardware RESET button or click Reset
in this screen.
Default settings include:

• Password of conference control host and administrator: 1234
• SSID: ZyXEL
• Server IP: 192.168.1.10
• WEP: disabled
• Gatekeeper: All Block
• Resolution: 1024 by 768
• Color depth: 32bit
• Refresh rate: 60Hz

Figure 30 System Setup > Reset to Default

4.7.2 Firmware Upgrade

Use this screen to upload new firmware to the WPA-1000. You should first have downloaded
the latest firmware file from the ZyXEL website.

"

Make sure you upload the correct firmware to the WPA-1000.