ZyXEL Communications WPA-1000 - Manual (Page 34)

Chapter 3 WPA-1000 Utility
WPA-1000 User’s Guide
34
3.2.1 USB PnS Token
A WPA-1000 USB PnS (Plug and Show) token is a USB storage device (such as a USB
memory stick) containing WPA-1000 utility files. Use a USB PnS token when you don’t want
to install the WPA-1000 utility on a computer but you want to make a presentation via the
WPA-1000 from it. You simply insert the USB storage device into that computer and it can
then connect to the WPA-1000 in order to make a presentation.
Use the USB PnS wizard to create a USB PnS token. The wizard copies a wps.ini file and a
WPA-1000 folder onto the USB storage device. The WPA-1000 folder contains the following
utility files:
(Delete these files from your USB storage device if you no longer want it to act as a WPA-
1000 USB PnS token.)
Follow this procedure to make the token.
1 Select Make PnS Token in the utility control panel menus (see Figure 12 on page 32 ).
2 Select Next.
Figure 14 USB PnS Token Wizard 1
3 Insert the USB storage device into an available USB port on a computer that is
connecting to the WPA-1000. Then select the Flash Drive (the drive where you inserted
the USB storage device) in the next screen.
• Token.exe • WPA-1000.exe
• ConnectAP.dll • DLCapPP.dll
• uninstall.bat • PseudoWebServer.dll
• VideoDuration.dll • WiFiMan.dll