ZyXEL Communications WPA-1000 - Manual (Page 42)

Chapter 4 The Web Configurator Screens
WPA-1000 User’s Guide
42
4.5.3 The Change Password Screen
It is highly recommended you change the default conference control host and administrator’s
passwords. Both default passwords are ‘1234’.The conference control host manages who can
project via the WPA-1000. The administrator has access to these configuration menus.
Figure 23 Device Setup > Change Password
The table below describes the labels on the screen.
Apply Click Apply to save your settings.
Cancel Click Cancel to return to the previous settings.
Table 10 Device Setup > Device Config (continued)
LABEL DESCRIPTION
Table 11 Device Setup > Change Password
LABEL DESCRIPTION
Conference Control
Enter New
Password
Type a new password here. Use a combination of letters and numbers (0~9,
A~Z, a~z, no spaces allowed) up to 8 characters long.
Confirm New
Password
Type exactly the same password here to confirm your password
Administrator
Enter New
Password
Type a new password here. Use a combination of letters and numbers (0~9,
A~Z, a~z, no spaces allowed) up to 8 characters long.
Confirm New
Password
Type exactly the same password here to confirm your password
Apply Click Apply to save your settings.
Cancel Click Cancel to return to the previous settings.