ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 - Manual (Page 87)

P-660H/HW/W-T Series User’ Guide
87 Chapter 5 Wireless LAN
5.9 Configuring RADIUS
To set up your Prestige’s RADIUS server settings, click WIRELESS LAN, RADIUS. The
screen appears as shown.
Figure 30 RADIUS
The following table describes the fields in this screen.
Table 20 RADIUS
LABEL DESCRIPTION
Authentication Server
Active Select Yes from the drop-down list box to enable user authentication
through an external authentication server.
Server IP Address Enter the IP address of the external authentication server in dotted decimal
notation.
Port Number The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs
you to do so with additional information.
Shared Secret Enter a password (up to 31 alphanumeric characters) as the key to be
shared between the external authentication server and the access points.
The key is not sent over the network. This key must be the same on the
external authentication server and Prestige.
Accounting Server
Active Select Yes from the drop-down list box to enable user authentication
through an external accounting server.
Server IP Address Enter the IP address of the external accounting server in dotted decimal
notation.