ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 - Manual (Page 212)

P-660H/HW/W-T Series User’ Guide
Chapter 18 Introducing the SMT 212
18.3 Changing the System Password
Change the Prestige default password by following the steps shown next.
1 Enter 23 in the main menu to display Menu 23 - System Security.
2 Enter 1 to display Menu 23.1 - System Security - Change Password as shown next.
3 Type your existing system password in the Old Password field, for example “ 1234 ", and
press [ENTER].
Figure 109 Menu 23.1 Change Password
4 Type your new system password in the New Password field (up to 30 characters), and
press [ENTER].
5 Re-type your new system password in the Retype to confirm field for confirmation and
press [ENTER].
3 LAN Setup Use this menu to set up your wireless LAN and LAN connection.
4 Internet Access Setup A quick and easy way to set up an Internet connection.
11 Remote Node Setup Use this menu to set up the Remote Node for LAN-to-LAN
connection, including Internet connection.
12 Static Routing Setup Use this menu to set up static routes.
14 Dial-in User Setup Use this menu to set up local user profiles on the Prestige.
15 NAT Setup Use this menu to specify inside servers when NAT is enabled.
21 Filter and Firewall Setup Use this menu to configure filters, activate/deactivate the firewall
and view the firewall log.
22 SNMP Configuration Use this menu to set up SNMP related parameters.
23 System Security Use this menu to set up wireless security and change your
password.
24 System Maintenance This menu provides system status, diagnostics, software upload,
etc.
25 IP Routing Policy Setup Use this menu to configure your IP routing policy.
26 Schedule Setup Use this menu to schedule outgoing calls.
99 Exit Use this to exit from SMT and return to a blank screen.
Table 73 Main Menu Summary
# MENU TITLE DESCRIPTION
Menu 23.1 - System Security - Change Password
Old Password= ?
New Password= ?
Retype to confirm=?
Enter here to CONFIRM or ESC to CANCEL: