ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 - Manual (Page 392)

P-660H/HW/W-T Series User’ Guide
Appendix G 392
config edit firewall set #> rule destaddr-
range ip address> This command sets a rule to have the Prestige
check for traffic going to this range of
addresses.
config edit firewall set #> rule TCP destport-
single This command sets a rule to have the Prestige
check for TCP traffic with this destination
address. You may repeat this command to
enter various, non-consecutive port numbers.
config edit firewall set #> rule TCP destport-
range #> This command sets a rule to have the Prestige
check for TCP traffic with a destination port in
this range.
config edit firewall set #> rule UDP destport-
single This command sets a rule to have the Prestige
check for UDP traffic with this destination
address. You may repeat this command to
enter various, non-consecutive port numbers.
config edit firewall set #> rule UDP destport-
range #> This command sets a rule to have the Prestige
check for UDP traffic with a destination port in
this range.
Delete
config delete firewall e-mail This command removes all of the settings for
e-mail alert.
config delete firewall attack This command resets all of the attack
response settings to their defaults.
config delete firewall set
This command removes the specified set from
the firewall configuration.
config delete firewall set
rule This command removes the specified rule in a
firewall configuration set.
Table 138 Firewall Commands (continued)
FUNCTION COMMAND DESCRIPTION