ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 - Manual (Page 47)

P-660H/HW/W-T Series User’ Guide
47 Chapter 1 Getting To Know Your Prestige
The following table describes the LEDs.
1.5 Hardware Connection
Refer to the Quick Start Guide for information on hardware connection.
Table 2 Front Panel LEDs
LED COLOR STATUS DESCRIPTION
PWR/SYS Green On The Prestige is receiving power and functioning properly.
Blinking The Prestige is rebooting or performing diagnostics.
Red On Power to the Prestige is too low.
Off The system is not ready or has malfunctioned.
LAN Green On The Prestige has a successful 10Mb Ethernet connection.
Blinking The Prestige is sending/receiving data.
Amber On The Prestige has a successful 100Mb Ethernet connection.
Blinking The Prestige is sending/receiving data.
Off The LAN is not connected.
WLAN (P-
660HW/ P-
660W)
Green On The Prestige is ready, but is not sending/receiving data
through the wireless LAN.
Blinking The Prestige is sending/receiving data through the wireless
LAN.
Off The wireless LAN is not ready or has failed.
DSL/PPP Green Fast
Blinking
The Prestige is sending/receiving non-PPP data.
Slow
Blinking
The Prestige is initializing the DSL line.
On The system is ready, but is not sending/receiving non-PPP
data.
Amber On The connection to the PPPoE server is up.
Blinking The Prestige is sending/receiving PPP data.
Off The DSL link is down.