beautypg.com

ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual

Page 278

background image

P-660H/HW/W-T Series User’ Guide

Chapter 29 Filter Configuration

278

The following figure illustrates the logic flow of an IP filter.

Port #

Type the destination port of the packets you want to filter. The field range is 0 to

65535. A 0 field is ignored.

Port # Comp

Select the comparison to apply to the destination port in the packet against the value

given in Destination: Port #. Choices are None, Less, Greater, Equal or Not

Equal.

Source:

IP Addr

Type the source IP Address of the packet you want to filter. A 0.0.0.0 field is ignored.

IP Mask

Type the IP mask to apply to the Source: IP Addr field.

Port #

Type the source port of the packets you want to filter. The range of this field is 0 to

65535. A 0 field is ignored.

Port # Comp

Select the comparison to apply to the source port in the packet against the value

given in Source: Port # field. Choices are None, Less, Greater, Equal or Not

Equal.

TCP Estab

This applies only when the IP Protocol field is 6, TCP. If Yes, the rule matches

packets that want to establish TCP connection(s) (SYN=1 and ACK=0); else it is

ignored.

More

If Yes, a matching packet is passed to the next filter rule before an action is taken or

else the packet is disposed of according to the action fields.
If More is Yes, then Action Matched and Action Not Matched will be N/A.

Log

Select the logging option from the following:
None – No packets will be logged.
Action Matched – Only packets that match the rule parameters will be logged.
Action Not Matched – Only packets that do not match the rule parameters will be

logged.
Both – All packets will be logged.

Action Matched

Select the action for a matching packet. Choices are Check Next Rule, Forward or

Drop.

Action Not

Matched

Select the action for a packet not matching the rule. Choices are Check Next Rule,

Forward or Drop.

When you have completed this menu, press [ENTER] at the prompt “

Press ENTER to Confirm

or ESC to Cancel:

” to save your configuration, or press [ESC] at any time to cancel.

Table 96 Menu 21.1.x.1 TCP/IP Filter Rule (continued)

FIELD

DESCRIPTION