beautypg.com

1 traffic redirect setup, Figure 113 menu 2.1traffic redirect setup, Table 77 menu 2.1traffic redirect setup – ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual

Page 219

background image

P-660H/HW/W-T Series User’ Guide

219

Chapter 20 Menu 2 WAN Backup Setup

20.2.1 Traffic Redirect Setup

Configure parameters that determine when the Prestige will forward WAN traffic to the
backup gateway using Menu 2.1 — Traffic Redirect Setup.

Figure 113 Menu 2.1Traffic Redirect Setup

The following table describes the fields in this menu.

KeepAlive Fail

Tolerance

Type the number of times (2 recommended) that your Prestige may ping the IP

addresses configured in the Check WAN IP Address field without getting a

response before switching to a WAN backup connection (or a different WAN

backup connection).

Recovery Interval(sec) When the Prestige is using a lower priority connection (usually a WAN backup

connection), it periodically checks to whether or not it can use a higher priority

connection.
Type the number of seconds (30 recommended) for the Prestige to wait

between checks. Allow more time if your destination IP address handles lots of

traffic.

ICMP Timeout

Type the number of seconds for an ICMP session to wait for the ICMP

response

Traffic Redirect

Press [SPACE BAR] to select Yes or No.
Select Yes and press [ENTER] to configure Menu 2.1 Traffic Redirect Setup.
Select No (default) if you do not want to configure this feature.

When you have completed this menu, press [ENTER] at the prompt “

Press ENTER to Confirm

or ESC to Cancel:

” to save your configuration, or press [ESC] at any time to cancel.

Table 76 Menu 2 WAN Backup Setup (continued)

FIELD

DESCRIPTION

Menu 2.1 - Traffic Redirect Setup
Active= No
Configuration:
Backup Gateway IP Address= 0.0.0.0
Metric= 15

Press ENTER to Confirm or ESC to Cancel:

Table 77 Menu 2.1Traffic Redirect Setup

FIELD

DESCRIPTION

Active.

Press [SPACE BAR] and select Yes (to enable) or No (to disable) traffic redirect

setup. The default is No

Configuration

Backup Gateway

IP Address

Enter the IP address of your backup gateway in dotted decimal notation.
The Prestige automatically forwards traffic to this IP address if the Prestige’s

Internet connection terminates.