Figure 20 wireless screen, Table 13 wireless lan – ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual
Page 74
P-660H/HW/W-T Series User’ Guide
Chapter 5 Wireless LAN
74
Figure 20 Wireless Screen
The following table describes the labels in this screen.
Table 13 Wireless LAN
LABEL
DESCRIPTION
Enable Wireless
LAN
You should configure some wireless security (see
) when you
enable the wireless LAN. Select the check box to enable the wireless LAN.
ESSID
The ESSID (Extended Service Set IDentification) is a unique name to identify the
Prestige in the wireless LAN. Wireless stations associating to the Prestige must
have the same ESSID.
Enter a descriptive name of up to 32 printable characters (including spaces;
alphabetic characters are case-sensitive).
Hide ESSID
Select Yes to hide the ESSID in so a station cannot obtain the ESSID through AP
scanning.
Select No to make the ESSID visible so a station can obtain the ESSID through AP
scanning.
Channel ID
The radio frequency used by IEEE 802.11a, b or g wireless devices is called a
channel.
Select a channel from the drop-down list box.
RTS/CTS
Threshold
The RTS (Request To Send) threshold (number of bytes) is for enabling RTS/CTS.
Data with its frame size larger than this value will perform the RTS/CTS handshake.
Setting this value to be larger than the maximum MSDU (MAC service data unit)
size turns off RTS/CTS. Setting this value to zero turns on RTS/CTS.
Select the check box to change the default value and enter a new value between 0
and 2432.