ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 - Manual (Page 211)

P-660H/HW/W-T Series User’ Guide
211 Chapter 18 Introducing the SMT
After you enter the password, the SMT displays the main menu, as shown next.
18.2.1 System Management Terminal Interface Summary
Entering
information
Type in or press
[SPACE BAR],
then press
[ENTER].
You need to fill in two types of fields. The first requires you to
type in the appropriate information. The second allows you to
cycle through the available choices by pressing [SPACE BAR].
Required fields <
?
> or
ChangeMe
All fields with the symbol must be filled in order to be able
to save the new configuration.
All fields with ChangeMe must not be left blank in order to be
able to save the new configuration.
N/A fields Some of the fields in the SMT will show a . This symbol
refers to an option that is Not Applicable.
Save your
configuration
[ENTER] Save your configuration by pressing [ENTER] at the message
"Press ENTER to confirm or ESC to cancel". Saving the data on
the screen will take you, in most cases to the previous menu.
Exit the SMT Type 99, then press [ENTER].Type 99 at the main menu prompt
and press [ENTER] to exit the SMT interface.
Table 72 SMT Main Menu
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
Prestige 660W-T1 Main Menu
Getting Started Advanced Management
1. General Setup 21. Filter and Firewall Setup
2. WAN Backup Setup 22. SNMP Configuration
3. LAN Setup 23. System Security
4. Internet Access Setup 24. System Maintenance
25. IP Routing Policy Setup
Advanced Applications 26. Schedule Setup
11. Remote Node Setup
12. Static Routing Setup
14. Dial-in User Setup 99. Exit
15. NAT Setup
Enter Menu Selection Number:
Table 71 Navigating the SMT Interface
OPERATION KEY STROKE DESCRIPTION
Table 73 Main Menu Summary
# MENU TITLE DESCRIPTION
1 General Setup Use this menu to set up your general information.
2 WAN Backup Setup Use this menu to setup traffic redirect and dial-back up.