The alarm log -5, The temperature log -5 – Western Telematic AFS-16-1 User Manual

Page 85

8-5

The Status Screens

8.5.2. The Alarm Log
The Alarm Log provides a record of all alarm events that were initiated by the Over
Temperature Alarms, Ping-No-Answer Alarm, Invalid Access Lockout Alarm, Power
Cycle Alarm and Monitor/Alarm Input feature.

To view the Alarm Log, access command mode using a password that permits
Administrator or SuperUser level commands and then proceed as follows:

• Text Interface: Type

/L and press [Enter]. The "Display Logs" menu will be

shown. At the Display Logs menu, type

2 and press [Enter] to display the

Alarm Log.

• Web Browser Interface: Place the cursor over the "Logs" link on the left hand side

of the screen wait for the fly-out menu to appear. To view the Alarm Log, click on
the "Alarm Log (Display)" link; to download the Alarm Log, click on the "Alarm Log
(download)" link.

The Alarm Log will display the following information for each logged event:

• Date: The date when the alarm occurred.

• Time: The time that the alarm occurred.

• Trigger: The name of the alarm which was triggered.

• Description: A brief description of the event that triggered the alarm.

Note: In the Text Interface, the following commands are also available:
• Press

[Enter] to display the next screen full of data.

• Press

[Esc] to exit from the log menu and return to the command prompt.

• Type

E and press [Enter] to erase the Alarm Log.

8.5.3. The Temperature Log
The temperature log provides a record of AFS-16 temperature readings, in reverse
chronological order, with the most recent events appearing at the top of the list.

To view the Temperature Log, access command mode using a password that permits
Administrator or SuperUser level commands and then proceed as follows:

• Text Interface: Type

/L and press [Enter]. The "Display Logs" menu will be

shown. At the Display Logs menu, type

3 and press [Enter] to display the

Temperature Log.