Western Telematic AFS-16-1 - Manual (Page 43)

5-22
Basic Configuration
5.7.2. Adding Circuit Groups
The "Add Circuit Group to Directory" option allows you to create new Circuit Groups and
assign circuit access rights to each group. Note that the Add Circuit Group function is
only available when you have accessed command mode using a password that permits
Administrator Level commands.
The Add Circuit Group Menu can be used to define the following parameters for each
new account:
• Circuit Group Name: Assigns a name to the Circuit Group. (Default = undefined.)
• Circuit Access: Determines which Circuit Modules this Circuit Group will be
allowed to control. (Default = undefined.)
Notes:
• In the Text Interface, Circuit Access is configured by selecting item 2 and
then selecting the desired circuits from the resulting submenu.
• In the Web Browser Interface, Circuit Access is configured by selecting the
desired circuits from a list of all circuits in the Add Circuit Group menu.
• After you have finished defining or editing Circuit Group parameters, make
certain to save the changes before proceeding. In the Web Browser
Interface, click on the "Add Circuit Group" button to save parameters; in the
Text Interface, press the
[Esc] key several times until the AFS-16 displays
the "Saving Configuration" message and the cursor returns to the command
prompt.
5.7.3. Modifying Circuit Groups
The "Modify Circuit Group" function allows you to edit existing Circuit Groups in order
to change circuit access rights. Note that this function is only available when you
have accessed command mode using a password that permits Administrator Level
commands.
Once you have accessed the Modify Circuit Group menu, use the menu options to
redefine parameters in the same manner that is used for the Add Circuit Group menu, as
discussed in Section 5.7.2.
Note: After you have finished changing or editing parameters, make certain
to save the changes before proceeding. In the Web Browser Interface, click
on the "Modify Circuit Groups" button to save parameters; in the Text Interface,
press the
[Esc] key several times until the AFS-16 displays the "Saving
Configuration" message and the cursor returns to the command prompt.
5.7.4. Deleting Circuit Groups
This function is used to delete individual Circuit Groups. Note that this function is only
available when you have accessed command mode using a password that permits
Administrator Level commands.
Note: Deleted Circuit Groups cannot be automatically restored.