Western Telematic AFS-16-1 - Manual (Page 119)

17-6
Command Reference Guide
/T Toggle Command
This command can be used to toggle any Circuit or Circuit Group to either the "A"
position or the "B: position.
Note: When this command is invoked in Administrator Mode or SuperUser
Mode, it can be applied to all AFS-16 Circuits and Circuit Groups. When this
command is invoked in User Mode, it can only be applied to the Circuits and/or
Circuit Groups that have been enabled for your account.
Availability: Administrator, SuperUser, User
Format:
/T ,
[,Y] [Enter]
Where:
c The number or name of the Circuit(s) or Circuit Group(s) that you wish
to switch. To apply the command to several Circuits, enter a plus sign (+)
between each Circuit number. To apply the command to all Circuits
allowed by your account, enter an asterisk character (*).
p The desired switch position. Enter an "A" to switch specified circuits to the
"A" position or a "B" to switch circuits to the "B" position.
,Y (Optional) Suppresses the command confirmation prompt.
Example:
Assume that your account allows access to Circuit 2 and Circuit 3. To switch Circuits 2
and 3 to the "A" position without displaying the optional command confirmation prompt,
invoke the following command line:
/T 2+3,A,Y [Enter]
/DC Set All Circuits to Default States
Sets all Circuit Modules to their user-defined default state. For information on setting
circuit defaults, please refer to Section 5.6.
Note: When this command is invoked in Administrator Mode and SuperUser
Mode, it will be applied to all AFS-16 circuits. When invoked in User Mode, the
command will only be applied to the Circuits that are allowed by your account.
Availability: Administrator, SuperUser, User
Format:
/DC[,Y] [Enter]
Where ,Y is an optional command argument, which can be included to suppress the
command confirmation prompt.
/U Send Parameters to File
Sends all AFS-16 configuration parameters to an ASCII text file as described in
Section 15. This allows you to back up the configuration of your AFS-16 unit.
Availability: Administrator
Format:
/U [Enter]