Western Telematic AFS-16-1 - Manual (Page 123)

17-10
Command Reference Guide
/I Reboot System (Default)
Reinitializes the AFS-16 unit and offers the option to keep user-defined parameters or
reset to default parameters. As described in Sections 5.10.1 and 15.3, the /I command
can also be used to restore the unit to previously saved parameters. When the /I
command is invoked, the unit will offer four reboot options:
• Reboot Only (Do NOT default parameters)
• Reboot & Default (Keep IP Parameters & SSH Keys; Default all other parameters)
• Reboot & Default (Default ALL parameters)
• Reboot & Restore Last Known Working Configuration
Availability: Administrator
Format:
/I [Enter]
/UF Upgrade Firmware
When new versions of the AFS-16 firmware become available, this command is used to
update existing firmware as described in Section 16.
Note: When a firmware upgrade is performed, the AFS-16 will require
approximately 15 minutes for the upgrade procedure.
Availability: Administrator
Format:
/UF [Enter]
/TEST Test Network Parameters
Displays a menu which is used to test configuration of the Syslog and SNMP Trap
functions and can also be used to invoke a Ping Command. For more information,
please refer to Section 11.2 and Section 12.2.
Notes:
• In order for the ping command to function with domain names, Domain Name
Server parameters must be defined as described in Section 5.9.5.
• The Test Menu's Ping command is not effected by the status of the Network
Parameters Menu's Ping Access function.
Availability: Administrator, SuperUser
Format:
/TEST [Enter]