Toshiba B-570 SERIES - Manual (Page 97)

6-7
EM18-33010A 6. DIAG. TEST OPERATION
■ Sample Print
[Print Condition]
•
Preset count : 1
•
Print speed : 127 mm/sec.
•
Sensor : No sensor
•
Printing method : Thermal transfer
•
Supply length : 50 mm
•
Issuing mode : Batch printing
(without rewinder)
PROGRAM V1.0 A FMRM0034801
Checksum
Part No. of ROM of software
Revision No.: Space or A to Z
Software version No.
ROM name
PROGRAM: Program ROM (Flash ROM)
MASK: Mask ROM (Character generator)
2800 :
KANJI
KANJI ROM2 Checksum
KANJI ROM1 Checksum
KANJI OUTLINE ROM4 Checksum
KANJI OUTLINE ROM3 Checksum
KANJI OUTLINE ROM2 Checksum
KANJI OUTLINE ROM1 Checksum
0000 0000 :
0000 0000 0000 0000 : : :
NOTES: 1. Checksum varies according to the software version.
2. When the KANJI ROM or KANJI OUTLINE ROM is not installed, the checksum
becomes “0000”.
3. The last two digits of the checksum are not 0.
Fig. 6-2
6.2 SELF TEST MODE
1 PROGRAM/MASK ROM Check
NOTES: 1. Software version No., part No. of ROM and checksum vary according to the software
version of PROGRAM/MASK ROM.
2. The last two digits of the checksum are usually 0.
2 KANJI ROM Check
1
2
3
4
5
6
7
8
9
PROGRAM V1.0A FMRM0034801:2800
MASK V1.0 FMRM0034901:B100
KANJI 0000:0000
0000:0000:0000:0000
EEPROM OK
DRAM 1024KB
CARD OK
SENSOR1 00000000,10110011
SENSOR2 [H]3.1V [A]2.8V
[R]3.3V [T]2.4V
[RANK]3
DIP SW 00000000,10001010
EXP.I/O OK