Toshiba B-570 SERIES User Manual
Page 55
3-3
3. OPTIONAL KIT
EM10-33006A
This memory module is a D-RAM PC board used to extend the image buffer. An image buffer, equipped
with 2MB (2MB x 1) as standard, can be expanded up to 4MB by installing the 2MB of D-RAM PC board.
*: The size for the tag paper is 138.0 x 997.0.
D-RAM PC board is available from the Parts Center.
When purchasing please refer to the following.
8DRAM PC Board Ass'y
Part No. FMBC0067801 (Service No. B-249-01)
NOTE: Common use as B-672/872 Series.
This flash memory card of 1 MB or 4 MB is used to save logs, writable characters and print format data.
It is directly connected to CN1 on the I/F PC board, and stored data can be overwritten by down-line-
loading from the PC.
When purchasing flash memory cards, refer to the following table. The proper operation of these
memory cards have been verified.
Remarks
Option
Option
(Revision Date: Feb. 10. 2000)
3.3 MEMORY MODULE
RAM
Capacity
2MB
4MB
IC No.
IC17~20
IC17~24
Max. drawing size (normal)
(W) x (H) (mm)
138.0 x 640.0
Part No.
CAC-0293001
CAC-0293001
Max. drawing size (on-the-fly)
(W) x (H) (mm)
138.0 x 320.0
138.0 x 661.3
*138.0 x 995.0
Batch
Strip
Auto-cut
*138.0 x
991.0
Batch
Strip
Auto-cut
Maker
Maxell
Mitsubishi
Maxell
Maxell
Centennial Technologies INC.
INTEL
Simple TECHNOLOGY
Mitsubishi
PC Card KING MAX
PC Card
Type
EF-1M-TB AA
MF81M1-GBDAT01
EF-4M-TB CC
EF-4M-TB DC
FL04M-15-11119-03
IMC004FLSA
STI-FL/4A
MF84M1-G7DAT01
FJN-004M6C
FJP-004M6R
Device code
D0H
88H
ADH
A2H
A0H
Capacity
1M
Byte
4M
Byte
Maker code
1CH
B0H
04H
01H
89H
89H
3.5 FANFOLD PAPER GUIDE MODULE:
This is paper guide exclusively used for fanfold paper. Attaching it in place of the standard paper guide
allows the printer to print on fanfold paper.
For the installation procedure, refer to the Maintenance Manual.